Software architecture
SPBT2632C2A
8/27
Doc ID 022833 Rev 4
4 Software
architecture
4.1 Lower
layer
stack
●
Bluetooth v3.0
●
Device power modes: active, sleep and deep sleep
●
Wake on Bluetooth feature optimized power consumption of host CPU
●
Authentication and encryption
●
Encryption key length from 8 bits to 128 bits
●
Persistent Flash memory for BD address and user parameter storage
●
All ACL (asynchronous connection less) packet types
●
Multipoint capability
●
Sniff mode: fully supported to maximum allowed intervals
●
Master slave switch supported during connection and post connection
●
Dedicated inquiry access code for improved inquiry scan performance
●
Dynamic packet selection channel quality driven data rate to optimize link performance
●
Dynamic power control
●
802.11b co-existence AFH.
4.2
Upper layer stack: Amp'ed UP
●
SPP, IAP, SDAP and GAP protocols
●
RFComm, SDP, and L2CAP supported
●
Multipoint with simultaneous slaves.
4.3
AT command set: abSerial
Please see command list reported in the SPBT2532C2.AT datasheet, Appendix D, for
details.
The complete command list including the iAP commands will be reported in the user
manual UM1547.
