ST 500 "Piranha" Operation Manual: Software
54
In fig.49:
1 - list of highlighted ranges: sequence number, initial (lower) and ending (upper). The
line of the adjustable range is highlighted in blue
2 - activity checkbox. If not ticked: signals found in this range will be classified as
"UNKNOWN"
3 - info button showing a user comment left while editing the range
4 - controls for data exchange with ST 500
5 - input field for initial (lower) frequency
6 - input field for ending (upper) frequency
7 - text color selection box (red or green)
8 - input field for comments (only numbers and Latin letters can be used)
9 - band deletion (the active line highlighted blue will be deleted)
10 - accepting/canceling changes made
11 - adding a new range
12 - return to factory settings of the "RANGES HIGHLIGHTING" mode
USING THE "RANGES HIGHLIGHTING" MODE
1. Go to "RANGES HIGHLIGHTING" tab.
2. Load data by one of the below methods:
from the PC, by clicking "Load from File" and selecting the file; all the data including range
customizations will be loaded
from ST 500, by clicking "Read ALL from ST500"; all the data including range
customizations will be loaded
from ST 500, by clicking "Read from ST500"; only range customizations will be loaded
from ST 500, by clicking "Restoring default ranges"; list of ranges set by the manufacturer
will be loaded.
Parameter adjustment
1. To edit a band, select the corresponding table row, which will be highlighted blue
2. Edit the following parameters:
initial (lower) and/or ending (upper) frequency band (fig.49, 5, 6)
highlighting color (fig.49, 7)
comment (fig.49, 8)
on/off activity checkbox (fig.49, 2)
3. Click "Apply Changes" to save the adjustments, or "Cancel" to exit without saving changes.
Adding a new band
1. Click "Add New"
2. Input new band parameters:
lower and upper frequency bounds (fig.49, 5,6)
highlighting color (fig.49, 7)
