15
The gas valves may require periodic lubrication depending on their frequency of use. To
lubricate the valves:
Turn off the gas and electricity supply to the appliance.
1.
Remove the pan supports, control knobs and burner assemblies.
2.
Disassemble the pan support locating pins and then remove the hob.
3.
Dismantle the valve body by removing the screws retaining the control shaft assembly (refer
4.
to diagram if necessary).
Remove and clean the cone with a cloth and suitable dilutant.
5.
Ensure the cone is clean and dry and slightly grease the outside with Ragosine Moly LM or
6.
approved alternative graphite lubricant.
Replace the cone, rotate it and remove it. Wipe off any excess grease ensuring that the gas
7.
holes are clear.
Replace the cone and re-assemble the valve body. Re-assemble the hob and other
8.
components.
Pressure adjustment
screw
Pressure test
point
Servicing And Minor Adjustments
(Continued)
Lubricating Gas Valves
Summary of Contents for 5667100
Page 20: ...52596 V0 1...
