St George 5667100, Operating And Care Instructions

Page: 10 / 20

10
Installation Instructions
Your safety and the proper care of your appliance is extremely important. Incorrect installation
of the appliance as a result of not following these detailed instructions can affect the
appliance’s performance. Appliances incorrectly installed will invalidate the warranty and
we strongly recommend that the cavity, venting, wiring and gas connections be prepared as
described in the instructions. This is critical to appearance, performance and safety.
WARNING:
Installation must comply with Standards Australia Wiring Rules (within Australia) as
well as your local electrical and building codes and regulations and any other applicable
requirements.
Your appliance must be properly installed and grounded by a qualified person.
This appliance must be installed according to the installation requirements of the local gas
authority and the appropriate installation code issued by Standards Australia (Ref. Code
AS5601) and the building authorities’ requirements and any other applicable requirements.
!
Measurements
Unless otherwise noted, all dimensions provided are in millimetres (mm). The sizes allow for only a
small degree of error, so all cut-outs must be precise and square. To ensure the cabinetry is well
finished the cut edges must also be square and care taken to ensure the cut edges are free of
chips.
Note: Cutout is to have square corners.
52
520
700
488
77
56 0
52
520
900
488
77
875
5667100
5669100
The duplicate rating plate must be attached to an adjacent surface for
easy viewing, without the necessity of removal of the appliance.