ST A
UDIO
DSP24 ADAT
- 21 -
ADAT
Select this clock source when the device connected to the optical
ADAT input should supply the clock / samplerate for the DSP24
ADAT card.
S/PDIF
Select this clock source when you want to record from the S/PDIF
input with the clock supplied by the device connected to the coaxial
digital input of the card. Please note that you cannot select
S/PDIF
as clock source and record from the ADAT input at the same time.
Please note that it is very important that an active device is connected to the digital
input (ADAT and/or S/PDIF) when the sync is set to external (
ADAT
and/or
S/PDIF
). It is not possible to record a clean signal from the digital input if you use
internal synchronisation ... also it is not possible to playback and record clean
signals (on any in- and output) if you use external synchronisation without anything
connected to the digital input. In fact, on some systems it is not possible to record
and playback at all with a wrong sync setting! It is important to use this setting very
carefully. It can also be changed in the
H/W Settings
dialog.
