Web Application Gateway IGW/935 – First Steps
D o c u m e n t R e v i s i o n 1 . 3
3
1
INTRODUCTION
This documentation gives you an overview about the initial operation and the first steps of
use with the Web Application Gateway IGW/935.
1.1
Checklist
Compare the content of your Web Application Gateway start-up package with the checklist
below. If any item is missing or appears to be damaged, please contact SSV.
Web Application Gateway IGW/935 with eSOM/3517
Documentation
Plug-in power supply
DVI/HDMI video cable
CD-ROM for eSOM/3517
Screwdriver
1.2
Required Equipment
To operate the IGW/935 the following hardware is required:
•
One Ethernet cross-over cable or two Ethernet patch cables and a switch.
To configure the IGW/935 a PC with the following features is required:
•
Windows 7 or higher
•
Web browser (e.g. Firefox, Chrome)
•
Telnet/SSH client (e.g. TeraTerm)
•
FTP client (e.g. FileZilla)
•
10/100 Mbps Ethernet network controller and TCP/IP configuration
•
CD-ROM drive
1.3
Conventions
Convention
Usage
bold
Important terms
monospace
Filenames, Pathnames, program code, command lines
Table 1:
Conventions used in this document
