Web Application Gateway IGW/935 – First Steps
D o c u m e n t R e v i s i o n 1 . 3
13
4.5
LAN1 Configuration
The IP address of the LAN1 interface is ex-factory set to
192.168.0.126
.
To configure the LAN1settings choose from the menu
Network > LAN1
.
Figure 10:
LAN1 settings
To enable the automatic IP address assignment via DHCP follow these steps:
1.
In the section
IP address configuration
enable the radio button
automatically
.
2.
Click on
[Apply]
.
Please note:
After DHCP was enabled, it is necessary to re-log into the SSV/WebUI with the new
assigned IP address of LAN1. Please refer to
chapter 4.3
to find out the current IP
address.