Remote Access Gateway IGW/920 - First Steps
4
S S V
E M B E D D E D
S Y S T E M S
2
SAFETY GUIDELINES
Please read the following safety guidelines carefully! In case of property or personal
damage by not paying attention to this manual and/or by incorrect handling, we do not
assume liability. In such cases any warranty claim expires.
•
To provide the Remote Access Gateway with power an external DIN-rail power supply
is needed. The power supply should be in immediate proximity to the Remote Access
Gateway.
•
The power supply must provide a stable output voltage between 12 - 24 VDC. The out-
put power should be at least 2.5 W.
•
Please pay attention that the power cord or other cables are not squeezed or damaged in
any way when you set up the Remote Access Gateway.
•
The installation of the Remote Access Gateway should be done only by qualified per-
sonnel.
•
Discharge yourself electrostatic before you work with the Remote Access Gateway, e.g.
by touching a heater of metal, to avoid damages.
•
Stay grounded while working with the Remote Access Gateway to avoid damage
through electrostatic discharge.
•
The case of the Remote Access Gateway should be opened only by qualified personnel.