Remote Access Gateway IGW/920 - First Steps
16
S S V
E M B E D D E D
S Y S T E M S
5.5
Access via Telnet
To access the IGW/920 with a Telnet client please open a DOS window on your host PC
(you can find it in the Windows Start menu) and enter the following command to activate a
Telnet session:
telnet 192.168.0.126
The Linux of the IGW/920 is configured in a way, which you have to login with the user-
name root and the password root.
Figure 13:
Starting the Telnet client
In the upcoming Telnet window you can enter any Linux commands, which will be executed
by the IGW/920 operating system (similar to the serial console).
Figure 14:
Access via Telnet client
Note: The Telnet command in fig. 13 requires the current IP address of the IGW/920
as parameter.