2
Sub Enclosure Assembly and Installation
C. Depending on installation location, attach all four mounting
brackets on the bottom installation position or the back
installation position. Use M6x16mm Button Head Torx Screws
and M6 Washers to secure the brackets.
C
E
E.Insert Olastic Ribbed Rivets into any unused bracket mounting
holes.
F. Depending on installation location, attach all four mounting
brackets on the bottom installation position or the back
installation position into the vehicle. Use 10 x .75” Screws to
secure the sub enclosure into the vehicle.
F
A
A. Before installing the Sub into the enclosure, connect the
enclosure’s positive and negative speaker wire into the posts on
the Sub.
B
B. Using the (8) 7 x 1.25” Screws, attach the Subwoofer into the
Sub Enclosure.
D
D. Attach Amp Cover to Enclosure using four M6x16mm Torx Screws
and M6 Washers. Route Sub Wiring through hole cut. Attach all six
Vibration Absorption Pads to the back or bottom, depending on
which position you orient the enclosure into your vehicle.
