SSV Works GN-5K, User Manual, Page: 11 / 28

11
J. Use three (3) M6 screws & washers to hand tighten the
enclosure from behind the fi rewall. Once all M6 screws have
been hand tightened, go back and tighten all screws with T30
torx driver.
H. Place enclosure in location for mounting.
K. Route the speaker wire away from any moving parts and sharp
metal, then connect to the amplifi er.
G. Using a ¼ drill bit, drill holes for mounting of the enclosure.
I. Line up the holes from the enclosure to the mounting plate and
use three (3) M6 screws and washers to mount the enclosure.
Once all M6 screws have been hand tightened, go back and
tighten all screws with T30 torx driver.
J
H
K
G
I