User Manual
PROFIBUS DP Modbus TCP
/
Gateway
GT200-DP-MT
WWW.SSTCOMM.COM
18
6.4.2 Ethernet Configuration View Interface
Click Ethernet in configuration view interface; when choosing a different type of protocol, the configuration
view interface and configurable items are different.
The protocol type selection: Modbus TCP master
Modbus TCP master configuration view is shown as follows:
The configurable items include: assign IP mode, IP address, subnet mask, gateway address, DNS1, DNS2,
response timeout, delay between polls, output mode. As shown below:
Assign IP mode: Manual Assign, BOOTP and DHCP optional.
Response wait time: After the Modbus TCP master sent out commands, it waited for response from the slave.
Delay between polls: A Receive the right response after one Modbus command has been sent or sending next
Modbus command after response timeout.
Output mode: Continuous output, disable output and change-of-value output can be selected.
The protocol type selection: Modbus TCP Slave
Modbus TCP slave configuration view is shown as follows:
