User Manual
PROFIBUS DP Modbus TCP
/
Gateway
GT200-DP-MT
WWW.SSTCOMM.COM
17
4
）
Delete commands: Left click on the command to be deleted, perform the operation of deleting the
command.
5
）
Edit node: Left click the node needs to be reset, and then set parameters of this node in configuration
interface.
6
）
Copy node: Left click the existing node, choose the node and execute the operation of copying nodes
(include all commands under the node)
7
）
Paste node: Left click and choose any existing node, execute operation of paste node. Then at the
Ethernet rear part you can see a new node (include all commands under the node); Node parameters of new node
is default setting, it needs to be reset.
6.4 The Operation of Configuration Interface
6.4.1 Fieldbus Configuration View Interface
Click the fieldbus in the equipment view interface, displaying configuration view interface as follows:
The configurable items include:
Bus Type: PROFIBUS DP
PROFIBUS DP input bytes: Set through the Hardware Configuration of PROFIBUS DP
PROFIBUS DP output byte: Set through the Hardware Configuration of PROFIBUS DP
Double-fault clear: open and close optional.
