16
Mounting the thermostat
Disassemble the device .
1.
Remove the front cover . For that, carefully press in turn, by thin slot
screwdriver, the latches located on the lower side of the front cover,
pulling it slightly out (Figure 6a) .
2.
Take off the cover (Figure 6b) .
3.
Place the rear part of the device into the mounting box and fasten by
means of at least two screws .
Figure 6a
To assemble the device, it is required to align the arrows on the power supply
part with those on the control part of the unit and install the control part
pushing it up to fixation.
