WWW.SSTCOMM.COM
38
As is shown above, there are 2 slots configured, that is: 128byte input + output, 128byte input + output
The same as STEP7 module, users can drag the data module on the right side to the left slots.
Notes: The slots and module in PROFINET configuration must be the same as that of STEP7.
4.3.1.2 Modbus Master
The configurable parameters are:
Modbus baud rates, data bits, parity, stop bits, transmission mode, response timeout, delay between polls,
output mode and scan rate
The configuration interface is shown as below:
Summary of Contents for GT200-PN-RS
Page 53: ...WWW SSTCOMM COM 53...
