5
Application
Access handsfree telephone video
with speech/control button, door
release button and 7 additional but-
tons with 2-colour status LED. All
buttons are freely programmable.
The display shows the camera image
and the graphic menu interface.
With the functions calling, speech,
door release, vision, light, remote
switching and call silencing.
Performance features:
• Display 8.8 cm
• Entrance for storey calls
• Exit freely programmable
• Call differentiation between door
calls, storey calls and indoor calls
• Switching functions
• Status indications
• Video memory function
• Integrated 5-way control button
• Can be used with table-top acces-
sory AZTV 870-… as a table-top
device
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Scope of supply
•
AHFV 870-… (Base plate and
housing with circuit board)
•
RJ45 plug
• Operating instructions for the
end user
•
This product information
English
Mounting
1
Recommended mounting height
appr. 1.65 m to display height/
viewing height.
2
Open the device from the back
by releasing the base plate with the
locking lever.
3
Align the base plate centrally rela
-
tive to the flush mounted box and
mark the fixing holes.
4
When mounting directly on the
wall, fasten the base plate using
4 screws, paying attention that
the plate is the right way up (top
marking).
5
Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
6
To remove the housing, press
the lock upwards using a flat blade
screwdriver. The circuit board
remains in the housing superstruc
-
ture.
Lettering
7
The lettering panel can be
inscribed to indicate the button
functions. The see-through panel
can be lifted at the side.
A marking template is provided in
the download area of our website.
Terminal assignment
Left RJ45 socket
1 - 8
LAN
Right RJ45 socket
3, 6
Storey call button
4, 5
switching contact
30 V AC/DC, 1 A
1, 2, 7, 8
dependent on the
Access accessories
used
Installation and commissioning
The Access commissioning instruc-
tions and the Access planning and
system manual can be found in the
download area.
Video memory
Pictures are stored centrally on the
server.
Similar to photographs, saved
images are subject to copyright.
Button assignment
The screen display is controlled using
the 5-way control button.
Enter button
Switch on the display with the round
Enter button in the centre. This takes
you to a selection menu. Confirm
the selected function.
Control buttons
The control button is used to navi-
gate within the menu points.
The door release function is perma-
nently assigned to the key button.
All the other buttons of the device
are freely programmable and can be
assigned with two functions each.
Programming is performed at the
server.
Accessories for AZTV 870-…
AZTV 870-… table-top accessory for
conversion from a wall-mounted to
a table-top device.
Specifications
The device is supplied by PoE
(class 2)
Bell volume: max. 83 dB(A)
Colour display: 8.8 cm
Resolution: 320 x 240 Pixel
Input for storey call ERT (potential-
free)
Potential-free contact:
max. 30 V, 1 A
Dimensions (mm) W x H x D:
105 x 277 x 23