SSR Motorsports Lazer5, Owner'S Manual

Page: 27 / 32

27
•
Front/Rear Turn Signal Bulb Replacement
1. Remove the screw from the backside of
the turn signal housing.
2. Remove the lens, move the screw side of
the lens outward to release the inner tab.
3. Remove the bulb by pressing in and turn-
ing it to the right.
4. Install a new 12V 10W bulb, press it in and
turn it to the left.
5. Reinstall the lens and secure with the
screw you removed in step 1.
• Vehicle Storage Information
If you plan to store your moped for an ex-
tended period of time take these steps to
protect your vehicle:
1. Change the engine oil.
2. Lube the drive chain.
3. Drain the fuel tank and fuel system of any
gasoline (this includes the carburetor).
4. Remove the spark plug and fill the cylinder
with 15-20cc’s of engine oil then turn the en-
gine over several times. Reinstall the spark
plug when complete.
5. Remove the battery, store it in a cool, dry,
shaded area and maintain the charge.
6. Clean and dry your moped.
7. Set front and rear tire pressures.
8. Cover the moped indoors in an area where
the temperature doesn’t fluctuate drastically.
• To prepare unit for use after storage
If stored over 4 months, change the engine
oil. Test the battery and all other parts before
use.
Caution:
Gasoline stored for long periods of times
will deteriorate. If storing fuel for longer
than 30 days use a stabilizer product.
Warning:
Gasoline is extremely flammable, when
draining the fuel please keep away from
fire or sparks that could ignite the fuel.