8
EN
1 . Information about this document
1 .1 Function
These operating manual provides all necessary information for the assembly, installation
and safe operation of the anchor plate. The operating manual must always be readable and
available during the operating life of the device. Read the operating manual carefully before
using the device. Always hand this operating manual over to future owners and users of
the device. Add any supplement received from the manufacturer to the operating manual.
1 .2 Safety instruction for the authorized skilled personnel .
The tasks described in this operating manual may only be carried out by trained skilled
personnel authorized by the plant owner. You must read and understand the operating
manual before starting the HOLDX RS/RL-A1/A2 anchor plate. Familiarize yourself with the
applicable rules and regulations relating to industrial safety and accident prevention. The
national legislation applies to the assembly, installation and regular technical inspections.
1 .3 Symbols
Caution
If the warnings are not observed, faults or malfunctions as well as injury to
persons and/or damage of the machines can occur.
Information
Helpful additional information
1 .4 Scope of application
The product described herein has been developed to be a part of an overall system or machine
for safety-related application in process and automation technology. The manufacturer of
the plant or machine is responsible for ensuring the correct overall function of the system.
The anchor plate may only be used in accordance with the following versions or for appli-
cations approved by the manufacturer. For detailed information on the application area: see
Section 2 – Product description.
1 .5 Safety Instructions
Observe the safety instructions in the operating manual, which are identified by above
symbol for caution or warning. Follow national installation, safety and accident prevention
regulations. For additional technical information refer to SSP data sheets or visit our website
at www.safety-products.de. We reserve the right to make technical modifications for reasons
of improvement.
1 .6 Foreseeable Misuse
Danger to persons or damages to parts of machines or installations can arise as a result
of inappropriate or incorrect use or manipulation of the anchor plate. Please observe the
related information in the standard EN ISO 14119. It is prohibited to use with HOLDX
RS-A1/A2 or HOLDX RL-A1/A2 spare parts or accessories, which have not been expressly
approved by the manufacturer.
1 .7 Liability Disclaimer
We accept no liability for damages or operational malfunctions resulting from improper
installation or failure to comply with this operating manual. No other liability is accepted
by the manufacturer for damages resulting from use of spare parts or accessories, which
have not been approved by the manufacturer. Any unauthorized repairs, reconstructions and
modifications are not permitted for safety reasons and rule out liability of the manufacturer
for resulting damages.
2 . Product Description
2 .1 Intended use
The HOLDX RS-A1/A2 or HOLX RL-A1/A2 anchor plates are intended exclusively for use with
the process locks HOLDX RS1/2 (short design) or HOLDX RL1/2 (long design).
2 .2 Design types
This operating manual is valid for the following design types:
Type code HOLDX R
- A
Design
S
short design
L
long design
Grid
1
fixed grid 50 N
(permanent process lock with permanent magnet)
2
without fixed grid
(without permanent magnet)
Example:
HOLDX RS-A1
Anchor plate for HOLDX RS1/2 (short design)
with fixed grid 50 N (permanent process lock with permanent magnet)
HOLDX RL-A2
Anchor plate for HOLDX RL1/2 (long design)
without fixed grid (without permanent magnet)
2 .3 Technical data
Ambient conditions
Operating temperature min./max.
-25 ... + 55°C
Storage temperature min./max.
-25 ... + 70°C
Degree of contamination
2
Protection class
IP67
Mechanical data
Permanent latching force
50 N
Smart latching force (adjustable with HOLDX Manager)
0 / 30 N / 50 N
Dimensions
Anchor plate RS-A1/A2
Width
45 (35) mm
Length
108.5 mm
Height
17.5 mm
Weight
125 kg
Anchor plate RL-A1/A2
Width
34 mm
Length
214.4 mm
Height
20.1 mm
Weight
475 kg
Torque (mounting screw) anchor plate
6 Nm
Fastening
screwed connection with pan-head screws M6 Torx with pin (countersunk)
Strength class
min. A2/70 (yield strength > 450N/mm² and
tensile strength > 700N/mm² fixing with medium-strength threadlocker,
e.g. Loctite 243 Anchor plate housing materials RS-A1/
A2
PBT GF30, PA GF 46, S235 nickel-plated, Poron
Anchor plate housing materials RL-A1/A2
PBT GF30, S235 nickel-plated
Shock resistance
30 g / 11 ms
Vibration resistance
10 to 150 Hz, 1 g, 55 Hz 3 x 30 min