Ssl SD511MB, User Manual, Page: 35 / 41

During conversation in progress,
tune the Volume switch until you reach
the desired volume level.
ADJUST THE VOLUME
1). Before using the function of the Blue-
tooth about the unit , please check your
phone’s instruction guide or contact
phone manufacture if you are not sure
if your phone supports the hands-free
Bluetooth function .
2). When operating the function of blue-
tooth about the unit , you need make
your call-phone and the unit success-
fully for one time. Afterwards, you only
need to take on the power and the
function of blue-tooth will work in three
minutes automatically if you want to
operate the function of blue-tooth .
3). If you want not to use the function of
the Blue-tooth about the unit , you can
select the Bluetooth OFF .
Note:
-34-
Touch Screen Operation
During talking mode , user can touch
the screen of the “
” range (or press
the button on remote control )
to transfer the audio from the unit back
to the mobile phone for privacy reason .
“PAIR/ ”
CALL TRANSFER
In Bluetooth menu, touch the screen
of “
” range (or press briefly
button on remote control) .
“BND/ ”
END/REJECT A CALL
In Bluetooth menu, touch “ ” range
(or press longer button on
the remote control the
will display on the
TFT monitor .
“ BND/ ”
“DIAL LAST CALL
/DIAL OUT NOW ”
REDIAL LAST NUMBER
ANSWER A CALL
After you hear the ring tone, a incoming
telephone number will display on the
TFT monitor . Touch the screen of “
”
range to listen or press the
button shortly on the remote control .
“PAIR/ ”
Note:
please make sure it support the
Bluetooth
profile. A2DP & AVRCP
In Bluetooth mode, repeatedly the MOD
on the panel to select the
Mode . The message will display like
following as below :
“BT MUSIC”
PLAY BT MUSIC
12560187900
CALL COME IN
NOW PLAYING
BLUETOOTH MP3
FLAT SWF
02:26