Ssl SD511MB, User Manual, Page: 34 / 41

-33-
1). Place the Car Kit and mobile hand-
set in 3 meters apart.
3). Set your bluetooth phone to
“discover” the Car Kit .
Following your phone’s instruction
guide for details, active your mobile
handset’s Bluetooth function, the
handset will search for accessible
Bluetooth devices.
4). Your phone will find this Car Kit .
Select this Car Kit from the list.
5). Enter passkey , then press
to pair the Car Kit and the hand-
set .
“8888”
OK “ ”
1. “Pair” To Your Bluetooth Phone
Prior to using the Car Kit for the fist time,
you must pair it with a Bluetooth-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical Bluetooth-
enabled mobile handset.
Touch Screen Operation
BLUETOOTH OPERATION
2. Using The Bluetooth Car Kit.
Once connecting is complete, you
may access the following function.
Some of the below mentioned funct-
ions only accessible for handset
supported with hands-free profile.
Touch the screen of “ ” section ,
the dial numbers will display on the
monitor . then you can touch the
number section on screen , and
then touch the “
” section to call .
MAKE A CALL
“ ” and “ ” serves as
the “ ” and “ ” button on your
mobile handset .
Please note :
When you dial the wrong number,
you can touch the screen of to
delete the wrong number . (You can also
press the “
” button on the remote
control to do so .)
Note:
“ ”
2). Put the Car Kit in pairing mode.
POWER a Press the button to turn
ON, the ICON will flash on TFT .
b. Touch the screen of section
or press longer the on
the remote control until the word
icon flashing , it’s now ready
for pairing.
.
“ ”
“PAIR/ ”
“ ”
6). Select the from the list
on the phone, if you connect succes-
sfully , the
ICON remains solid on
the screen , then you can operate
the function of blue-tooth about the
unite .
“CONNECT”
1). If the pairing can not be completed
within approximately 2 minutes ,
whiles the pairing mode is activated,
and you will need to reattempt pairing
(See steps 2-5 above) .
2). After pairing is completed, if the
ICON is stilling flash on the TFT ,
please follow the steps to reattempt
pairing through your handset until the
ICON remains solid on the screen.
IMPORTANT:
13800138000
CALL DIAL OUT