KEY PLATE
PLASTIC FRAME
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC FRAME of the both sides away, then insert the two KEY PLATES into
left and right sides of chassis as above illustration.
1. Remove 2 screws for protecting deck;
1) Remove chassis from Slide Bracket Housing as bellows:
2) Remove 2 screws for protecting deck as right;
2. Connecting all wires
1) Making chassis wear Slide Bracket Housing again;
2) Remove control panel from chassis as follows:
A. Press the OPEN button to flip down control panel .
B. Slide control panel rightwards a little, and pull it towards you .
OPEN button
INSTALLATION STEPS
