Loading or unloading a disc, USB or card
1.
Loading a disc, USB or card
To play files in a disc, press OPEN button to flip down control
panel, then insert a disc with label surface up into disc slot,
and then attach control panel onto chassis again, by now it
will automatically play.
*
CAUTION OF USING A DISC
1) Handle a disc by its edge, do not touch the surface of play side.
2) Before inserting disc, wipe the disc outwards from the disc center
with a clean, soft, dry, lint-free cloth. Do not use solvents/thinner
such as petrol/benzine, cleaner.
3) After taking a disc out of disc slot, put the disc inside disc case to
keep it clean.
4) Do not stick paper or tape on the disc surface of play side. If
there is glue (or analog) on the disc surface, must wipe it up
before using.
To play files in a USB, firstly open USB port cover, then insert USB storage into
USB port, and then it will play files in the USB automatically.
To play files in a card, firstly press OPEN button to flip down control panel and
remove it, then insert the card into card slot as bellows, and then attach control
panel onto chassis again, by now it will play files in the card automatically .
2.
Unloading a disc, USB or card
To unload the disc in disc slot, use STOP button to stop playback and then press
OPEN button to flip down control panel and press EJECT button to eject disc and
then remove it.
Label
surface up
Label side
facing upward
MEDIA OPERATION
