SRS Light Design DST8-DIN Series Instruction Manual Download Page 2

SRS Light Design s.r.o

, Rybničná 36/D , 831 06 Bratislava, Slovak Republic 

tel:+421244681417, fax:+421244681419, 

www.srslight.com

 , 

[email protected]

 

 

 

 
                        

DST8-DIN  

8-way DMX Splitter 

 

 

Instruction Manual 

 

Model: 
         DST8-3-DIN       3-pin DMX connectors 
         DST8-5-DIN       5 pin DMX connectors 
         DST8-C-DIN       Mixed DMX connectors 

 

ATTENTION! 

 
This  instruction  manual  contains  important  information  about 
the  installation  and  the  use  of  equipment.  Please  read  and 
follow  these  instructions  carefully.  Always  ensure  that  the 
power  to  equipment  is  disconnected  before  opening  the 
equipment or commencing any maintenance work. 

 

Summary of Contents for DST8-DIN Series

Page 1: ...l holder 1 5m Unischuko to PowerCon cable Wall mount holders with screws Temperature of use 10 ºC 45 ºC Warranty Two year 24 month warranty DECLARATION OF CONFORMITY According to guidelines 89 336 EEC and 92 31 EEC Name of producer SRS Light Design s r o Address of producer Rybnicna 36 D SK 83106 Bratislava Slovak Republic Declares that the product Name of product DST 8 way DMX Splitter Type DST8 ...

Page 2: ... Model DST8 3 DIN 3 pin DMX connectors DST8 5 DIN 5 pin DMX connectors DST8 C DIN Mixed DMX connectors ATTENTION This instruction manual contains important information about the installation and the use of equipment Please read and follow these instructions carefully Always ensure that the power to equipment is disconnected before opening the equipment or commencing any maintenance work ...

Page 3: ...rik PowerCon Always respect marking of L and N on connector for correct wiring of Line and Neutral when the connector is repaired or replaced Device is equipped with MCB with 2A fusing capacity additional fuses DMX connection DMX connectors are located on the front side of splitter board These are separated to two groups First group is wired in ratio 1 1 and is marked as DMX input and DMX thru Thi...

Page 4: ...t please check the main power input If the DMX cable is connected to the device LEDs marked as D and D go on for side marked as DMX input thru and this indicates that DST8 is receiving the DMX signal Speed of light on these LEDs also indicates the refresh rate of DMX signal Fast blinking high refresh rate slow blinking slow refresh rate There are 8 optically isolated outputs that retransmit the DM...

Reviews: