SRS Light Design s.r.o
, Rybničná 36/D , 831 06 Bratislava, Slovak Republic
tel:+421244681417, fax:+421244681419,
www.srslight.com
,
W-DMX functions
1.
W-DMX is turned off.
DST4W functions as a DMX
splitter. To turn the W-DMX on,
hold the mode button for 3
seconds. The MODE button lights
in green color.
2.
W-DMX is ready to be
linked. DST4W works as a
receiver of the W-DMX signal
without a link to the transmitter.
Hold button on the
Transmitter
to start the linkage of DST4W.
3.
W-DMX is linked. DMX is
missing on the Transmitter.
The W-DMX LED signalizes this
by blinking in red/green color.
Bargraph is in an active state.
To
disconnect
from
the
Transmitter, hold the W-DMX
button for 10 sec. Module will
turn to state 2.
4.
W-DMX is linked to the
Transmitter and is receiving the
DMX signal. Both indicators are
in green color. Bargraph is
working and showing the W-DMX
signal strength.
