Copyright By SRC
Design and Specification are subjected to change
Page 4
Step 2:
Orient and Align the Radiator Guard
RH (1) and Slip-in Washer M6 (5) – 2
off and Screw bolt M6 x 12 (4) – 2 off,
and
Slip-in the Original Screw
motorbike -3 off,( as shown ) and
through the Mounting point as shown
in Red colour.
Step 3:
Slip-in Washer M6 (5) – 1 off and Screw
M6 x 10 (2) – 1 off, and Slip-in the
Radiator in motorbike ( as shown ) and
through the Mounting point as shown
in Red colour.
The Final Mounted condition of the SRC
Radiator Guard as shown in the drawing.
