Copyright By SRC
Design and Specification are subjected to change
Page 3
Mounting Instructions
The Motorbike has to be held using the central
stand, and Side Stand, drawn to the sides, to
have access to the mounting of Large Side
stand.
Side Stand looks as shown, prior to the Start of
the Installation of SRC Large Side Stand.
Step 1:
Orient and Slip-in the Middle Plate (1),
as shown.
The peripheral Inner walls of the Middle
plate, will closely hug the outer walls of
the Side stand.
Step 2:
Orient the Bottom Plate (3), in-line
with the Mounting Holes on the
Middle Plate and Slide-in the
Countersunk Head M6 x 20 Screws (4)
– 4 off, from the bottom side.
The Bottom plate has a rear side flap,
which closely hugs the Rear Periphery
of the Middle plate, to ensure
orientation, as well as to ensure No
slackness.
