Copyright By SRC
Design and Specification are subjected to change
Page 4
Step 4:
Orient and Align the Front Bracket (3), as
shown, in-line with the mounting points. Slip-in
the pair of Hexagonal Head Bolts (which were
removed earlier) and secure the threads.
Step 5:
Orient and Align the other side of the Front
Bracket (3), in-line with the through hole, as
shown in Red colour, and Slip-in Hex Screw M8
x 40 (8) – 1 off through the Slotted hole in the
Bracket and pass the screw through the hole in
the Gusset and secure it using Nut M8 (7) – 1
off from the other side.
Step 6:
Ensure Visual Orientation and tighten the Rear
End Bracket (2) and Front Bracket (2), as
shown. The As Is mounted condition of the
Bracketry are as shown in the drawing to the
Right-hand side.
