Copyright By SRC
Design and Specification are subjected to change
Page 3
Step 1:
The OEM Accessory where the Top
Rack is to be fitted, is as shown in
the drawing above
Step 2:
Orient and Align the Top Rack (1),
Washer M6 – 4 off (4), Screw M6 x 30
– 4 off (3), and place the Bush – 4 off
(4), as shown in the drawing, in-line
with the Mounting hole in the
Motorbike
The Bush is to be sandwiched
between the Top surface of the
Mounting Hole and the bottom side
of the Top Rack.
The final mounted condition of the
Top Rack is as shown in the drawing
on the right.
