Copyright By SRC
Design and Specification are subjected to change
Page 3
Step 1:
During Mounting the Large Side Stand, let the
Motorbike firmly rest on the floor, using the Centre
Stand.
The side stand can be brought forward (position as
shown in the drawing) to have access to the
Mounting/ Assembly of the SRC Large Side Stand.
Step 2:
Orient and Slip-in the Middle Plate (4), as shown.
The peripheral Inner walls of the Middle plate,
will closely hug the outer walls of the Side stand.
Orient the Bottom Plate (1), in-line with the
Mounting Holes on the Middle Plate and slide-in
the M6 Screws (4) from the bottom side.
The Bottom plate has a rear side flap, which
closely hugs the Rear Periphery of the Middle
plate, to ensure orientation, as well as to ensure
No slackness
Step: 4
Slide-in the Top Plate (3), as shown
and orient the mounting holes in-line
with the 4 Projecting screws.
