7
Valve Stem Installation
V a l v e S t e m I n s t a l l a t i o n
Shine a flashlight through the rim to illuminate the valve stem hole.
Use a sharp object to cut the tape from the valve stem hole.
Remove the nut and o-ring from the valve stem.
Insert the new valve stem through the rim.
Install the o-ring onto the valve stem.
Thread the nut onto the valve stem so that the recessed
side faces the rim. This will allow the o-ring to seal against
the nut and prevent air from leaking out of the wheel.
NOTICE
Do not use a tool to tighten the nut; it must be handtight
only. Overtightening the nut can lead to a slow leak.
This concludes the Zipp Tubeless Rim Tape Service. Install the tire according to the tire manufacturer's instructions.
1
2
3
