9
Caliper Brake Pad Removal
C a l i p e r B r a k e P a d R e m o v a l
Use a T25 TORX® wrench to remove the brake caliper from the fork or
frame.
Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed.
Remove the E-clip from the pad retention bolt.
Remove the pad retention bolt from the caliper.
Remove the brake pads and pad H-spring from the caliper.
NOTICE
Brake pads must be replaced if the total thickness of the backing plate and
pad friction material is less than 3 mm.
1
2
Needle nose pliers
20 mm or 15 mm Thru Axle
2.5 mm hex wrench
QR
3
Digital Caliper
2.7-3.2 N•m (24-28 in-lb)
22 mm