Model SR411
i
Patient Floor Scale
Operating and Service Manual
Part No. MAN411
i
_MICROBAN_200610
Page 8 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
BASIC SYSTEM OPERATION
PATIENT WEIGHING:
STEP 1
: Place scale on hard smooth floor surface to ensure accurate data.
NOTE:
Avoid carpeting or uneven flooring surfaces.
STEP 2
: The scale will automatically turn on when weight is detected over five pounds and then
lock in on a stable weight
Alternatively,
press the “
Zero/Weigh
” button and wait for the display to indicate
“ZERO”. Release the
“Zero/Weigh”
button and the display will read
“0.0”
. Position
the patient on the platform. Weight will be displayed in a few seconds. A stable weight
will automatically be stored in memory.
STEP 3
: To manually hold a weight reading at any time during the weighing process, press the
“
Hold/Recall
” button.
NOTE:
When the scale is off, pressing any of the buttons will turn on the scale. Press
and hold the
“Zero/Weigh”
button to erase the last held weight from
memory. Only the last stabilized weight will be held in memory.
SCREEN DISPLAYED SYMBOLS:
Scale is zeroed and stabilized
Weight is locked in memory (next stable weight will override memory).
Applied weight load has stabilized
MEM
►
0
◄
