SR Instruments SRScales SRV945, Operating And Service Manual, Page: 11 / 14

Model SRV949 24 X 60 Platform Scale
Operating and Service Manual
Part No.: MAN949_170724
Page 11 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL: www.srscales.com
email: sri@srinstruments.com
Copyright
2017
S
Instruments, Inc.
CALIBRATION cont’d
SETTING CALIBRATION
NOTE : Ensure that nothing is in contact with the scale system during this procedure and that
all six (6) feet are touching a level surface. Remove hands from the system when noting the
displayed calibration results. (Use a known calibrated weight traceable to NIST.)
STEP 1 : Remove the display cover from bottom of scale
STEP 2 : Press the “ ZERO/WEIGH
” button to turn the scale on.
STEP 3 :
Press “
Lb/Kg
”
button and toggle to select lb.
STEP 4 : Press the left button on rear of display. Display will read “CAL”
STEP 5 : Toggle the “ ZERO/WEIGH
” button to read “FULL” then press “
HOLD/RECALL
”.
STEP 6 : Display will read “440.0”, set this value to the value of the selected weight

Press “
HOLD/RECALL
” to select a digit position

Press the “
ZERO/WEIGH
” button to change the value of the digit

When display reads “SAVE”, press the “
HOLD/RECALL
” button to cycle through
“Savd” and return to “CAL”
STEP 7 : Toggle the “ ZERO/WEIGH
” button to read “2 Pt” then press “
HOLD/RECALL
”.
Figure 5: Calibration Button Figure 6: Button Display
Continued next page
CAUTION
The integrated circuits and semiconductors on
the printed circuit boards may be damaged
by electrostatic discharge (ESD). Be sure to
use proper handling precautions at all times.