Lateral passes through inside.
Lateral Pass-Through back view.
3
3D COMPRESSION INLET
USE, CARE, AND FEEDING OF YOUR SQUIRREL
The 3D Compression Inlet is an advanced and effective innovation,
however it does require some care and maintenance. Try not to store
your suit in a tightly packed configuration. Do not store your suit folded
tightly in hot conditions. For instance, the worst thing that you could do
would be to leave it crammed into your stashbag in a hot car for a few
hours. In the case of inlet deformation, massaging them into shape at
or above room temperature will help to re-form them.
ARM FOAM OPTIONS
Your SWIFT 3 is shipped with 5mm black foam, which is inserted in the arms. You may choose to
jump the suit without the foam in the beginning, and add it in once you are fully comfortable with the
suit in all maneuvers, at all angles, and during all phases of the flight from exit to landing. The foam
adds glide and speed performance by increasing structure in the leading edge. Without the foam,
the suit is generally easier to fly.
For PPC Competition
If you intend to use the SWIFT 3 for PPC Performance Competitions, please contact us to discuss
higher performance arm foam options.
LATERAL PASS-THROUGH:
IMPORTANT
When you place your leg strap inside the suit, pass your harness lateral between the zippers. You
can zip the bottom slider (it has a spectra loop on it) up until it touches the bottom of your lateral.
