background image

7

Leg Wing Zipper Pulls

Always fasten your leg wing zipper pulls. If you walk 

around with them dragging on the ground, you will ruin 

them. If your suit is on, have the zipper pulls connected. 

Do not drag them through the dirt.

Hook Knife

Every suit comes standard with a Carbon Aero Jack hook 

knife. Check to make sure that the hook knife is loaded 

properly and secured.

Sleeping And Bathing Your Squirrel

Don’t smother your Squirrel! When it’s hibernating, it likes to breathe and relax in a cool, dry, 

comfortable nest. Do not store your suit for long periods of time in a tightly folded or compressed 

manner. Always fully shade-dry your suit if it becomes wet or damp. Gently rinse with fresh water 

to clean, or if ever exposed to salt water. Never use chemical detergents – Squirrels like it all 

natural, all the time!

Your suit can be hand washed in cold water, or machine 

washed cold on a gentle cycle. Never tumble dry your suit. 

Hang dry in the shade.

Contact Us

Please consider the following important points:

1. We designed, tested, and built your wingsuit.

2. Our job is to make sure that you fly as safely as possible, while having the most fun possible.

3. Our job is to help you understand, use, and progress in, your suit. 

4. Our job is to answer your questions, and we like our job.

For these reasons, we highly recommend that you contact US (SQRL) if you have any questions 

about any product that we make. We 100% guarantee that the information you receive from us 

will be more relevant, more accurate, and more thorough than anything you can find in facebook 

comments, internet forums, or even your DZ gear shop guru. So, again, call us. Email us. Together 

with your dealer & the local SQRL pros near you, we’re here to help. 

-Matt, Mike, Will, Marty, & All the Team. 

www.squirrel.ws

[email protected]

+1-855-FLY-SQRL

THANK YOU FOR FLYING SQUIRREL!

v.201904 - 

Check the FREAK 3 product page at www.squirrel.ws for the latest PDF version of this manual.

Summary of Contents for Freak 3









Reviews: