manualshive.com logo in svg

Squid Ink CoPilot 500, User Manual, Page: 133 / 152

Share
Download
Squid Ink CoPilot 500 User Manual Download Page 133

Parts List   133 

2005995 Rev O – 210712 

Inks and Fluids 

ATTENTION: 

Use only Squid Ink approved fluids for cleaning or flushing the 

Nozzle Face. Use only the appropriate cleaning or flushing fluid for the specific ink 

being used (see “Inks and Fluids” on page 

133

). 

ATTENTION: 

For oil-based Printheads, never use External Cleaning Fluid as an 

Internal Flush Fluid or Storage Solution, and never use External Cleaning Fluid on 

the Printer Face.

 

ATTENTION: 

Always use nonabrasive lint-free wipes (Part Number 2007021) 

when cleaning and maintaining the Printhead.

 

Ink Base 

Ink Description 

Internal Flush 

Fluid/Storage 

Solution 

External Cleaning 

Fluid 

Oil 

SI-PZ1000 

SI-PZ1043-Q 

Part Number: 2101143 

SI-PZ1053 

Mineral Oil Free (MOF) 

SI-PZ1525 

SI-PZ1943-Q 

Part Number: 2101943 

SI-PZ1053 

Solvent 

SI-PZ3300 

SI-PZ3043-Q 

Part Number: 2103143 

Summary of Contents for CoPilot 500

























































































































































Reviews:

No comments