background image

Manual | „Mr Beam“

4. Main Function

high quality LED: low consumption, brightness, stable capability and long life
each color of LED with 16666 dimming. RGB can make over 16.7 million colors, adding W can achieve  

  many effects. 

Liner dimming from 0–100%, strobe, gradual change, jumping change etc effects
Touch Buttoms,Unusual feeling to you
DMX512 Controller, 4 button set DMX ID address with led display
auto run /sound activated/master slave/interconnected multi-machine control
using switching power supply to protect the LED to work well
Built-in temperature control function: The output of LED will be reduced when LED is too hot
lens degree: 8º optional
Protection grade: IP65

5. DMX Control Function

DMX Channel (5CH)

Channel

DMX Value

Control Function

1CH

0–255

R 0–100%

2CH

0–255

G 0–100%

3CH

0–255

B 0–100%

4CH

0–255

W 0–100%

5CH

0–10

Close Strobe

11–255

Adjust Strobe Speed (1–20Hz)

DMX Channel (6CH)

Channel

DMX Value

Control Function

1CH

0–255

General dimming

2CH

0–255

R 0–100%

3CH

0–255

G 0–100%

4CH

0–255

B 0–100%

5CH

0–255

W 0–100%

6CH

0–10

Close Strobe

11–255

Adjust Strobe Speed (1–20Hz)

»
»

»
»
»
»
»
»
»
»

Summary of Contents for Mr. Beam













Reviews: