CAUTION ! EYE DAMAGES !
Avoid looking directly into the light source
(meant especially for epileptics) !
1.
Safety instructions
Thank you for choosing our Squareled Funky Bee. FOR YOUR OWN SAFETY, PLEASE READ THIS USER
MANUAL CAREFULLY
BEFORE YOU INITIAL START - UP!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this manual.
Important:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual
or any unauthorized modification to the device.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
During the operation the housing becomes hot). Allow the fixture to cool approximately 20 minutes prior to
manipulate with it.
Make sure that the available voltage is not higher than stated on the rear panel.
WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to
completely remove power from unit when not in use or before cleaning or servicing the fixture.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-
cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-
cord by the plug. Never pull out the plug by tugging the power cord.
This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
The electric connection, repairs and servicing must be carried out by a qualified employee. Do not
connect this device to a dimmer pack.
Do not switch the fixture on and off in short interval
s as this would reduce the lamp’s life.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Do not touch the device’s housing bare hands during its operation (housing becomes hot)! For
replacement use lamps and fuses of same type and rating only.
CAUTION!
Keep this device away from rain and
moisture! Unplug mains lead before
opening the housing!
CAUTION!
Be careful with your operations.
With a high voltage you can sufer a dangerous electric shock when touching the
wires!
71
75
Red in Pixel 14
0..255
Red in pixel 14 saturation control (0-100%)
72
76
Green in pixel 14
0..255
Green in pixel 14 saturation control(0-100%)
73
77
Blue in pixel 14
0..255
Blue in pixel 14 saturation control(0-100%)
74
78
White in pixel 14
0..255
White in pixel 14 saturation control(0-100%)
75
79
Red in Pixel 15
0..255
White in pixel 15 saturation control (0-100%)
76
80
Green in pixel 15
0..255
Green in pixel 15 saturation control(0-100%)
77
81
Blue in pixel 15
0..255
Blue in pixel 15 saturation control(0-100%)
78
82
White in pixel 15
0..255
White in pixel 15 saturation control(0-100%)
79
83
Red in Pixel 16
0..255
White in pixel 16 saturation control (0-100%)
80
84
Green in pixel 16
0..255
Green in pixel 16 saturation control(0-100%)
81
85
Blue in pixel 16
0..255
Blue in pixel 16 saturation control(0-100%)
82
86
White in pixel 16
0..255
White in pixel 16 saturation control(0-100%)
83
87
Red in Pixel 17
0..255
White in pixel 17 saturation control (0-100%)
84
88
Green in pixel 17
0..255
Green in pixel 17 saturation control(0-100%)
85
89
Blue in pixel 17
0..255
Blue in pixel 17 saturation control(0-100%)
86
90
White in pixel 17
0..255
White in pixel 17 saturation control(0-100%)
87
91
Red in Pixel 18
0..255
Red in pixel 18 saturation control (0-100%)
88
92
Green in Pixel 18
0..255
Green in pixel 18 saturation control (0-100%)
89
93
Blue in Pixel 18
0..255
Blue in pixel 18 saturation control(0-100%)
90
94
White in pixel 18
0..255
White in pixel 18 saturation control(0-100%)
91
95
Red in pixel 19
0..255
Red in pixel 19 saturation control(0-100%)
92
96
Green in pixel 19
0..255
Green in pixel 19 saturation control(0-100%)
93
97
Blue in pixel 19
0..255
Blue in pixel 19 saturation control(0-100%)
94
98
White in pixel 19
0..255
White in pixel 19 saturation control(0-100%)
23
17
95
99
Special function
0..19
No function
20..29
No function
30..39
No function
40..79
No function
80..89
All Motor reset
90..94
SCAN Motor Reset
95..99
Focus Motor Reset
100..119
Internalprogram 1
120..139
Internalprogram 2
140..159
Internalprogram 3
160..179
Internalprogram 4
180..199
Internalprogram 5
200..219
Internalprogram 6
220..239
Internalprogram 7
240..255
InternalSound program 1
