Squareled Aura Bar & Matrix Beam Light 100 Manual Download Page 6

Page: 6 / 14

Manual | Aura Bar & Matrix Beam Light 100

Slave Mode

Press the

MENU

button up to when the

Slave Mode

is shown on the display. Pressing the

ENTER

button.

Use the

DOWN

and

button to select the (slave 1) or (Slave 2) … or (Slave 15)mode.

Once selected, press the

ENTER

button to setup or automatically exit menu mode without any change after

7 seconds. To go back to the functions without any change press the MENU button.

Show Mode

Press the

MENU

button up to when the

Show Mode

is shown on the display. Pressing the

ENTER

button.

Use the

DOWN

and

button to select the Show0 (Random show) or Show1 (show 1) or Show2 (Show 2)

or … or Manual (Manual).
Once selected, press the

ENTER

button to store or automatically exit menu mode without any change after

7 seconds. To go back to the functions without any change press the MENU button.

Manual Mode

Press the

MENU

button up to when the

Manual Mode

is shown on the display. Pressing the

ENTER

button.

Use the

DOWN

and

button to select the strobe (strobe) or dimmer (dimmer). Once selected strobe,

Pressing the

ENTER

button, Use the

DOWN

and

button to change the strobe 0 – 255.

Once selected, press the

ENTER

button to store. If you select dimmer, Pressing the

ENTER

button. Use the

DOWN

and

button to change the dimmer 0 – 255, Once selected, press the ENTER button to setup or automatically

exit menu mode without any change after 60 seconds. To go back to the functions without any change press the

MENU

button.

Sound State

Select

Sound State

, press the

ENTER

button to confirm, present mode will blink on the display. Use the

DOWN

and

button to select the

On (sound on)

Off

(sound off)

mode.

Once the mode has been selected, press the

ENTER

button to setup, to go back to the functions without any

change press the

MENU

button again. Hold and press the

MENU

button about one second or wait for one minu-

te to exit the menu mode.

Sound Sense

Press the

MENU

button up to when the Sound Sense is shown on the display. Press the

ENTER

button and

the display will blink. Use the

DOWN

and

buttons to adjust the sound sensitively (0-100) of the unit.

Once selected, press the

ENTER

button to setup or automatically exit menu mode without any change after

7 seconds. To go back to the functions without any change press the

MENU

button.

Summary of Contents for Aura Bar & Matrix Beam Light 100















Search results

Summary of Contents for Aura Bar & Matrix Beam Light 100

Reviews:

Related manuals for Aura Bar & Matrix Beam Light 100

Brands by name

Popular brands

Squareled Aura Bar & Matrix Beam Light 100, Manual

Search results

Summary of Contents for Aura Bar & Matrix Beam Light 100

Reviews:

Related manuals for Aura Bar & Matrix Beam Light 100

Brands by name

Popular brands