12
2. Scope of usage
We recommend to use the SQuape
S[even] with resistances between 0.3 and
1.8 Ohm and 7 - 45 Wattages. It is possible
to use the atomiser above or below the abo-
ve specifications. Please note that the unit
may heat up due to excessive power. We do
not accept any liability. This is just a recom-
mendation. The use of the SQuape S[even]
and the coils you create is at your own risk.
3. Carton contents
1x SQuape S[even] BF RDA
1x SQuip Tip N DL
1x Top Cap POM Black
1x SQ Grip Band
1x Dripper screw plug
Various spare screws and o-rings
1x Manual
4. Specifications
4.1. Data
– Diameter: 22 mm
– Height (without SQuip Tip and 510
connector): 20mm
– Weight: 30.5g
– Connector: 510
4.2 Materials
Here at StattQualm we feel strongly about
what materials we use and therefore only
the best materials make it into our atomi-
sers. The following table shows what materi-
als are used in the SQuape S[even].
Should you have known allergies to one of
the listed materials we strongly suggest you
do not use this atomiser:
Stainless steel components: Steelnumber
1.4404 / 316L; Top Cap: PMMA, POM; Deck:
Aluminium ematalised; Mouthpiece and cap
stopper: POM; O-rings: nbr 70 shore
4.3 Features
• elegant and clean design
• easy supply due to bottom feeding
• stepless air flow control by turning the
cap. DL and MTL separated.
• single coil operation
• Heat dissipation by additional Top Cap
made of PMMA (POM included).
• Sealable bottom feeder port for use as
dripper - RDA without bottom feeding.
• non-conductive components to avoid
short circuits
• user-friendly handling and coiling options
• temp. control and volt/watt suitable
• 100% Swiss Made
Summary of Contents for Seven BF RDA
Page 2: ...Deutsch English Page 10 ...
Page 10: ...010 English Deutsch Seite 2 ...