SQIM 9305-9306-9307-9308 27-10-2020 V5 | SQ Professional Ltd © 2021 All rights reserved
Twist-N-Blitz Nutrient Extractor Instruction Manual
Use & CaRe
Take out the required length of mains cable and connect the
appliance to the mains supply
ASSEMBLY AND USE OF THE NUTRIENT
EXTRACTOR
1
Place one of the blending bottles
2
on a firm flat surface
with the open end facing up fill the blending bottle
2
with ingredients below the 600ml mark
image
a
2
fit the blade assembly
3
onto the blending bottle
2
and tighten firmly
image
b
3
Turn the blending bottle
2
upside down so that the
blade assembly
3
is at the bottom and align the arrow
on the blade assembly
3
with the arrow on the rim of the
motor unit
4
image
c
4
Twist the blending bottle
2
clock-wise until it locks, then
press the one-touch blend button
5
to start the blending
process
5
Hold the one-touch blend button
5
until the blending
process is finished Release the one-touch blend button
5
to stop the appliance
6
When blending is finished, and the blades have stopped rotating,
twist the blending bottle
2
counter-clockwise to remove it from
the motor unit
4
Unscrew the blade assembly
3
, fit the
spill-proof sport-style lid
1
on the blending bottle
2
and your
healthy drink is ready to go
image
d
USEFUL TIPS
1
To achieve the best results when blending solid ingredients,
cut them into small pieces before putting them into the
blending bottle
2
Do not exceed the MaX mark
2
ensure that there is always enough liquid, especially if
blending solid ingredients
3
In case the blades get stuck during blending process, stop
and unplug the appliance, remove the blending bottle
2
from the motor unit
4
and give it a shake If the blades
are still stuck, use a spatula or similar utensil to remove
the blockage
4
If blending warm liquids or ingredients always
ensure that they are cooled down before blending.
CLEANING
MOTOR UNIT
NEVER IMMERSE THE MOTOR UNIT IN WATER.
Wipe the motor unit
4
clean with a damp cloth and dry
immediately with a soft cloth to avoid scratches and water
marks on the surface
QUICK CLEANING
fill the blending bottle
2
half way with warm soapy water fit the
blade assembly
3
, and place onto the motor unit
4
Press and
hold the one-touch blend button
5
for 10-20 seconds Detach
the blending bottle
2
and the blade assembly
3
and rinse them
under running water then dry with a soft, lint-free cloth
BEFORE FIRST USE
ALL PARTS OF THE APPLIANCE ARE TO BE THOROUGHLY CLEANED BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION ON CLEANING).
BE CAREFUL WHEN HANDLING THE BLADE ASSEMBLY. THE BLADES ARE VERY SHARP. NEVER ATTEMPT TO FIT THE BLADE ASSEMBLY ONTO
THE MOTOR UNIT BY ITSELF. DO NOT OPERATE THE APPLIANCE FOR MORE THAN 60 SECONDS WITHOUT GIVING IT A REST PERIOD OF ONE
MINUTE.
A
C
B
6
