![background image](http://html.mh-extra.com/html/sq-professional/blitz-5690/blitz-5690_instruction-manual_1353340005.webp)
All images are for illustration purposes only. Actual products may vary.
IMPoRTanT safeGUaRDs
Mini Chopper Instruction Manual
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1
Read all instructions carefully before using the appliance
2 This appliance is intended for household use only.
It is not suitable for commercial use such as staff
kitchen areas and other working environments.
3
ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top
Do not place
the appliance onto a metal tray or metal surface whilst in use
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven Do not operate the appliance with
wet hands or barefoot
4
Keep the appliance and mains cable away from the edges of
work tops and out of reach of children Route the cable so
it does not overhang, and cannot be tripped over or caught
5
Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as a cooker Heat may damage the mains cable
6
The connections on both sides of the mains cable (the
appliance and socket) should never be strained If the mains
cable is damaged it must be replaced by a qualified person or
service to avoid any hazards
7
Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water or
other liquids to protect against fire, electric shock
and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9
This appliance must not be operated by an external timer or
a remote control system
10
sQ Professional ltd may not be held liable for eventual
damages to persons, animals or objects caused by incorrect
installation or deriving from improper, erroneous or
unreasonable use
11
This appliance is not suitable for processing very
hard ingredients, such as ice cubes, coffee beans,
hard spices, grinding granulated sugar to caster
sugar, or processing hot liquids.
12
only process small amount of food at a time
13 Blades are very sharp, handle with care. Always
hold the blade
5
at the top away from the cutting
edge when handling or cleaning.
14
ensure safety cover
3
and motor block
2
are se curely locked
in place before ope ra ting the appliance
15
switch off the appliance and unplug from the socket before
changing attachments or approaching parts that move while
in use Unplug the appliance when not in use
16
ensure that the appliance has come to a complete stop
before cleaning and storing away Keep the attachments,
motor block
2
, cable, and plug away from sources of heat
store in a dry place
17 Do not use this appliance for any other purpose
than its intended use.
18
Use the glass bowl only with the motor block
2
supplied (and
vice versa) and do not tamper the motor block in any way
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE!
BEFORE FIRST USE
ALL PARTS OF THE APPLIANCE ARE TO BE THOROUGHLY CLEANED
BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION ON CLEANING).
BE CAREFUL WHEN HANDLING THE BLADE AS IT IS VERY SHARP.
BEFORE FIRST USE
1
Make sure your electricity supply is the same as the one
shown on the underside of the power unit
2
Remove all the packaging and place the appliance on a dry,
flat, heat-resistant, non-flammable surface
3
Wash and dry all the parts thoroughly (see ‘Cleaning’)
ASSEMBLY
1
Place the
8
anti-slip rubber base on a flat, dry surface Put
the
6
glass bowl on the base
2
fit the blade
5
on the drive shaft
7
Place ingredients in
the bowl
3
ensure that the sealing ring
4
is attached to the safety cover
3
and place the assembled cover onto the bowl
4
Insert the motor block
2
into the safety cover
3
allign the
arrow on the motor block
2
with the arrow on the safety
cover
3
The Mini Chopper will not operate unless the motor
block, safety cover and the bowl are correctly engaged
5