Using the Zetta Widget software, first click on the Disable setting under Motion-
Trigger Sensitivity. Then, choose one of the following:
Car-Activate Recording: To capture video while driving, the camera will automatically
power on and start recording when the car’s ignition is started. The camera will
automatically shut down when the car is turned off.
Car-Stop Recording: To capture video while the car is parked, the camera will
automatically start recording video when the car is turned off and stop recording
video when the ignition is started.
Car-Activate & Car-Stop Recording: To capture video while both driving and when the
car is parked, the camera can be set to record for 24-hours of coverage.
After making your selection, make sure to click on Sync Settings to DVR. In addition
to leaving the camera’s three-position switch in the Custom mode, the camera must
be plugged into the vehicle’s cigarette lighter socket using the included USB cable
and 5-volt car adapter. The camera recognizes whether the vehicle is running or not
based on whether power is flowing into the socket. In the case of a vehicle with an
always-on powered socket, recordings must be manually started and stopped.
Auto On / Off
Like using the On/Off alarm setting on a clock radio, clicking on Scheduled Recording
will activate recordings at the times you’ve set. Clicking on Disable will cause the
camera to ignore scheduled recordings. Remember to click on the Sync Settings to
DVR button in the software and leave the camera’s three-position switch in Custom
mode. Auto On/Off is disabled for Surveillance and On-the-go modes.
Scheduling the Camera for Auto Recordings
Most times, you’ll want to leave the camera unattended so that it starts and stops
recordings on its own. Using the Zetta Widget software, you have the flexibility to
schedule the camera to shoot video at various times on a weekly schedule. You set
each block of recording time in three-hour increments and book them beginning
at 3 am, 6 am, 9 am, noon, 3 pm, 6 pm, 9 pm or midnight. You can also designate
whether the camera starts recording based solely on preset times or whether the
programmed times puts the camera on standby ready to record only when triggered
by an external event such as a voice, vibration or motion.
SPYTEC Z12 INTELLIGENT SECURITY CAMCORDER USER GUIDE
13
