HD SPY WATCH WITH NIGHT VISION USER GUIDE
8
4. Press the 10 o’clock button once, and the LED will change to red. Then, 3 seconds
later, press the same button again. The LED should now change to a solid blue light
again.
5. Tap the 2 o’clock button to start the audio recording, and the LED will flash blue
every second continuously to confirm a recording in progress.
6. You can pause the audio recording by pressing the 2 o’clock button, and the LED
will turn solid blue. To resume audio recording, tap the button again.
7. You can power off the camera after pausing the audio recording (see Step 6 above)
by holding the 2 o’clock button for 4 or 5 seconds until the red LED starts to flash
quickly.
LED Indicators
Pay attention to the two light emitting diodes embedded in the “12” of 12 o’clock on
the clock face. Here’s a summary of what the lights mean:
Blue and red flashing together for 5 seconds indicate that the camera is out of
memory.
Blue and red alternatingly flashing indicate the battery must be recharged.
Blue means Video mode. When the LED flashes, video recording is starting. When
it’s steady, the camera is in Standby mode.
Red generally means Photo mode. When the LED is steady, the camera is set to take
still pictures. When you press the 2 o’clock button and the LED flashes, a still image
has been saved.
When the red LED flashes three times, it means you’ve activated the infrared LEDs
for night vision.
A flashing red LED also indicates a step in starting a voice recording.
When the watch is connected to a USB port or the AC adapter, the blue LED on the
watch will stay steady during charging and turn red when fully charged.
