8
9
English
English
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
DELAY
To select the time interval before the camera records another
photo or video.
Additional setting
: It is possible to reduce the delay between
detections to 10 seconds (instead of 1 minute) with the following
procedure.
Note that the battery life will be affected.
Turn OFF the camera. Press and hold the UP button, turn
the camera on. "10_S" appears on the screen meaning the 1
minute delay has been replaced by a 10 second delay. To reset
the camera to 1 minute delay, follow the same procedure.
"1_M" appears on the screen (see figure below).
MULTI-SHOT
To take up to 4 consecutive shots at each detection. The delay
between each photo is 10 seconds with the infrared module and
15 seconds with the flash module. This option is available in
PHOTO mode only.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in VIDEO mode.
SETTINGS
Date, Time and Picture Quality
Turn OFF your camera; set the switch MODE to SET/TEST
and turn ON the camera. Press MENU/OK. An "H" will blink
on the screen indicating that the camera is in High Resolution
(5 MP). Use the DOWN button if you want to reduce the
resolution to "L" (3 MP).
Press MENU/OK to set the date and time (
MM/DD/YY, HH/
MM
). Use UP and DOWN to change the blinking digit. Once
finished, press MENU/OK and turn OFF the system to save
the changes.
MODE
When the PHOTO or VIDEO mode is selected, the test light in
front of the camera flashes for 60 seconds to allow the user to
leave without being photographed or recorded.
When the SET/TEST mode is selected, no picture or video is
recorded. Walk perpendicularly in front of the camera. When
the camera detects movement, the light blinks to indicate that
normally, a photo or video would be recorded. If the system does
not detect the movement, increase the distance detection using
the wheel DISTANCE or realign the system differently. When
you understand how the device responds to detections, you can
better adjust the direction or the height of the installation. When
the switch is set to VIEW, you can view the recorded pictures or
videos on a television.
10_5
10 sec. delay
1 min. delay
Test light
