6
7
English
English
POWER
The battery level is shown on the LCD screen. When a single
line remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The use
of alkaline or lithium batteries is strongly recommended.
Also
notethat the voltage of rechargeable AA batteries (1.2V)
is insufficient to power this camera.
During the installation
of the AA batteries, slide the switch inside the battery case to
ALK
. Insert the batteries as indicated inside the battery case.
Exact polarity must be followed. We also recommend the use of
new batteries to ensure maximum performance of your camera.
Lithium battery pack
This camera can be powered by a rechargeable lithium battery
pack LIT-09/LIT-C-8 (sold separately). This type of battery is
less affected by cold temperatures and lasts up to 3 times longer
then alkaline batteries. During the installation of the lithium
battery pack, slide the switch inside the battery case to
RECH
.
External (12V)
This camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of a 12-volt connection, slide the switch
inside the battery case to
ALK
(the AA batteries can remain
safely inside the camera)
. If combined with a lithium battery
pack, slide the switch to
RECH
.
For the accessories available,
refer to the section OPTIONS.
Power source
Switch Position
• 6AA
• 12V
• 12V + 6AA
ALK
• LIT-09
• 12V + LIT-09
RECH
MEMORY CARD
A memory card is required to operate this camera. When the
camera is ON and no memory card is used, the LCD displays
"CArd" meaning to insert one. The camera can accept memory
cards up to 32 GB capacity. Before inserting or removing the
memory card, the camera must be turned OFF. Failing to do so
may cause damage or loss of the pictures already recorded on
the memory card. When the SD card is full, the LCD displays
"FUL". The following data shows an approximate quantity of
photos which can be recorded by the camera depending on the
memory card capacity.
RESOLUTION
2.0 GB
4.0 GB
8.0 GB
32 GB
3 MP
5 MP
2000
1700
4100
3400
8200
6800
32800
27300
VIDEO RESOLUTION
320 x 240
640 x 480
2h
65 min
4h
2h10
8h
4h10
32h
16h40
"BUSY" LED
The "BUSY" light, located next to the LCD, lights up when the
camera is recording.
