7.
Position spreader
as shown. Attach
towbar (13) loosely
to cross-bar of
frame using 1 bolt
[24] [use bolt (44)
for model 80] &
nut [25]. Attach 2
braces (36) as
shown using 3
bolts (24) and
3 nuts (25).
Tow Bar & Hitch Assembly
8.
Tighten tow
bar and bracing
supports
9.
Attach hitch
plates (23) to tow
bar using 2 bolts
(24) and 2 nuts
(25) and tighten
securely.Insert
clevis pin (26) into
hitch assembly
and secure with
hair pin (27).
4
Axle Assembly
3
4.
Insert 2 bushings
(35) onto axle and
slide into hole on
frame leg.
5
Insert drive
wheel (38) onto
axle and insert
drive pin (34) and
secure with cotter
pin (41). Note:
For model 80 use
cotter pin (41)
only.
6.
Insert idle wheel
(38) onto axle and
secure with cotter
pin (21) .
