10
p i c l t d .c o m
STEP 1:
Test the battery by activating the power “ON” switch;
the light indicates a good battery. If the light flickers or does not
come on, replace the battery as described under Battery Instructions.
Turn the power switch to the “OFF” position after battery condition
is satisfactory.
STEP 2:
Connect high voltage (red) test lead to input jack (red) on
top of the High Voltage Pulse Input Terminal of the Pocket JeepMeter.
STEP 3:
Connect the other end (alligator clip) of the high voltage
(red) test lead to electrode or metal electrode wand connector on the
holiday detector.
STEP 4:
Connect ground (black) test lead to ground (black) input
jack on base of meter.
STEP 5:
The preferred method of grounding is to connect the
other end (alligator clip) of the ground (black cable) test lead
to the bare metal of the pipe. This takes into account all ground
path losses which may vary due to soil or moisture conditions as it
measures working voltage.
CAUTION!
This meter is used to measure low energy high
voltage. Operator may be subject to electrical shock if meter
is not properly grounded and / or operated in accordance with the
instructions and procedures prescribed below.
To start p ocke t
Jeepme ter opErAT IoNs
