Using the Motion Detection Video Recording
1. While the clock is in stand-by mode, press the mo-
tion detect button, symbolized by the icon showing a
camera and stick figure. Once pressed, the blue light
will blink 3 times and shut off. The clock will now re-
cord any motion that is detected.
2. To stop recording, press the same button again and
the blue light will reappear.
Using the Camera to Take Pictures
1. While the clock is in stand-by mode, press the
to take a picture. The blue light will turn off and reap-
pear after 2 seconds.
Using the Voice Recorder Feature
1. While the clock is in stand-by mode, press the micro-
phone button on the remote and the blue light will
blink 3 times and shut off. The clock will start voice
recording.
2. To stop the recording, press the microphone button
again.
View Videos on a PC or Mac
1. On a PC
a. Turn the On/Off switch near the battery to the ON posi-
tion and press the
button on the remote to switch on
the camera.
b. Connect the Clock to the PC using the enclosed USB cable.
c. Double-click on “My Computer” and locate “Removable
Disk”.
d. Double-click on “Removable Disk”.
e. Double-click on “DCIM”.
f. Double-click on “10020101”.
g. You may now copy, move, or play your video files.