Getting Started with Your Clock
1. On the right side of the clock, rotate the black side
panel counter-clockwise to locate the USB port, Micro
SD Card Slot and On/Off switch for the hidden cam-
era.
2. Locate the Micro SD card slot labeled “TF”. Insert your
Micro SD card into the slot with the gold contacts fac-
ing up.
3. Connect the USB power adapter for 4 hours to fully
charge the clock.
4. Put the On/Off switch in the ON position to enable
the camera feature.
5. On the remote, pull the plastic tab from battery to
activate the remote.
6. While pointing the remote at the clock, press the
button and a blue light will appear at the bottom-right
side of the clock, indicating that the clock’s camera
is in stand-by mode. Pressing the
button again
will cause the light to disappear, indicating that the
camera is turned off.
Using the Video Recording Feature
1. While the clock is in stand-by mode, press the
button on the remote and the blue light will slowly
blink 3 times and shut off. The clock will now be re-
cording.
2. To stop recording, press the
button again and
the blue light will reappear.